Ballast Resistor (6 X 4R7)
Link
Ballast Resistor (6 X 4R7)
Designed for use with low-impedance injectors.
Compatible with injectors with an impedance between 2 and 6 Ohms.
Contents:
6 x 4.
Reviews
Help others choose right. Be the first to write a review!
Write a reviewBallast Resistor (6 X 4R7)
Designed for use with low-impedance injectors. Compatible with injectors with an impedance between 2 and 6 Ohms.
Contents:
- 6 x 4.7 Ohm 25W resistors mounted on a heatsink
- Also available as a set of 4 resistors
Important to note:
- Injector ballast resistors can get very hot under high injector duty cycles
- The resistors should always be mounted on the included heatsink and bolted to the chassis to effectively dissipate heat
----------------
Guides & Info
Be first to write a review about this product!
Your review:
To send a review, you must be logged in.
Tools
