Innovate Kit LC-2 Wideband Controller & 8Ft. Cable
Innovate Motorsport
Reviews
Help others choose right. Be the first to write a review!
Write a reviewLC-2: Digital Wideband "Lambda" O2 Controller
The evolution of the world’s most popular stand alone digital O2 sensor controller, the Innovate Motorsports LC-2 builds upon the legacy of the LC-1 by adding simplicity and leading edge technology. The LC-2 utilizes 100% digital wideband air/fuel ratio technology on the market! The LC-2’s patented award-winning DirectDigital™ signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LC-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LC-2 includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges. The LC-2 can also be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with our Modular Tuning System (MTS). Key features include:
KEY FEATURES
Patented DirectDigital™ Wideband Technology
Wideband O² Compatible with ALL fuel types
Ability to calibrate O² sensor for maximum accuracy
Integrated dual-color status LED (Green/Red)
*2-Configurable linear 0-5v analog outputs
Optional sensor cable lengths available: 3ft, 8ft (Included), and 18ft
Positive lock connectors for all connections
Innovate MTS serial in/out
Serial connection to your PC
Real-time display data on screen and/or with powerful LogWorks software
*Two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog Output #1 (Yellow) is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR; Analog Output #2 (Brown) 1.1 volt = 14 AFR and .1 volt = 15 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
LC-2: Complete Lambda Cable Kit (8 ft.). Includes: LC-2 Controller, 8 Ft. Sensor Cable, *Program Cable, & Manual. DOES NOT INCLUDE O² SENSOR OR BUNG. P/N: 38810
Specifications
Power
Operating Voltage
9.8V to 16V DC
Input Current, O² heater initial warm-up
2.0A nominal, 3A max
Input Current, O² normal operation
0.8A nominal, 1.1A max
Environmental
Operating ambient temperature
0° to 140° F (−17.78° to 60° C)
Storage ambient temperature
−40° to 185° F (−40° to 85° C)
Water resistance
Splash resistant, non-submersible
Sensors
Compatible Types
Bosch™ LSU4.2 & Bosch™ LSU4.9
Bosch™ Heater Control
Digital PID via pump-cell impedance
Measurements
Lambda
.5 to 8.0
Air/Fuel Ratio
7.35 to 117 (gasoline), Fuel Type Programmable
Accuracy
For Lambda
Accurate to +/- .007 (.1 AFR)
Response Time
Free Air to Lambda
< 100 mS ( < 25 mS typical)
Inputs
Serial
1, Innovate MTS Compatible
Outputs
Analog
2, 0-5VDC, 10 bit resolution, programmable
Serial
1, Innovate MTS Compatible
Communication
Serial
MTS (Innovate Modular Tuning System) compatible
----------------
Guides & Info
Be first to write a review about this product!
Your review:
To send a review, you must be logged in.
Associated products
Tools
