ARP head stud bolts Mitsubishi 4G63 -93 U/C
ARP - Head studs
Reviews
Help others choose right. Be the first to write a review!
Write a reviewARP head stud bolts Mitsubishi 4G63 -93 U/C
U/C is an abbreviation for "Undercut", which means that the bolts have a slightly smaller diameter on the unthreaded part of the bolt.
The undercut improves the tightening of the cylinder head more evenly compared to those that are not undercut as they stretch. This can be an advantage if, for example, the cylinder head gasket would not be 100% smooth over the entire surface, then the bolts compensate for this.
Socket Size: 14mm 12pt, 5mm Allen
Thread: M12x1.25
Tightening torque: Tightened in 3 steps.
Step 1: 30 ft/lbs Or 40.6 nm
Step 2: 60 ft/lbs Or 81.3 nm
Step 3: 90 ft/lbs Or 122.0 nm
----------------
Guides & Info
| Bilmärke | Mitsubishi |
Be first to write a review about this product!
Your review:
To send a review, you must be logged in.
Associated products
Tools
