Hurricane Oil cooler 13 row (255mm)
Hurricane Motorsport
Reviews
Help others choose right. Be the first to write a review!
Write a reviewHurricane 13 row oil cooler 255mm
Black universal aluminum oil cooler from Hurricane motorsport.
- Fully aluminum for the best heat conducting properties
- Low pressure drop across the inlet and outlet
- Durable core
- Robust construction
- Black Design
- Flexible mounting
- M22x1.5 connections with female thread
- Adapters are available as Full Flow
- Quality from Hurricane Motorsport
Choose connections
In the drop down menu, select fittings. Full Flow with minimal restriction or regular adapters.
Oil cooler for all types of engine oil, rear axle oil, gear oil and other transmission oils.
Oil cooler is a must on a tuned engine / drivetrain. Higher power output and or/and performance driving, the heat development also increases with increased oil temperature as a result.
Some examples are drifting, track racing and rally where all cars need oil coolers because of high load and oil temperature.
Sizing of oil lines
What size of hose and fittings you should pick have no general answer. AN8 is most common if you do not know what to have. TThings that affect include:
- Oil line ID
- Oil line length
- Fitting size
- Number of fittings
- Angle of fittings
- Oil filter housing
- Oil thermostat
- Sandwish adapter
- Oil filter
- Wet sump or dry sump
- Oil viscosity
- Ambient temperature
In the end, it is about not getting too much pressure drop between the input and output of the motor / drivetrain. Measure this before and after assembly so you know for sure.
Technical info
Heigth: 100mm + fittings
Width: 255mm incl brackets
Core Width: 208mm incl. end plates
Width CC between connections: 175mm
Width CC between mounting holes: 235mm
Thickness: 51mm
Connections: M22x1,5 female thread
Material: 6061 Aluminum (T6061)
Weight: ~0,70 kg
Oil capacity: ~0,19liter
Max working pressure: 10bar
Colour: Black
Each oil cooler is pressure tested separately to ensure high quality.
----------------
Guides & Info
Be first to write a review about this product!
Your review:
To send a review, you must be logged in.
Associated products
SPAL cooling fan 96mm / 3,8" suction
250 m³/h - Good choice for oil cooler etc
In stock
SPAL cooling fan 96mm / 3,8" blowing
250 m³/h - Good choice for oil cooler etc
In stock
Suitable bracket
Suitable hose
Suitable AN-fittings
KIT:
