SPD V2 Check Valve Full flow AN10 black
SPD Performance Parts
Reviews
Help others choose right. Be the first to write a review!
Write a reviewSPD V2 are the latest check valves. These check valves come with a completely new construction that differs from all others on the market where the check valve is completely sealed and can withstand very high pressures and back pressures. These check valves are specially designed to handle all fuels, air, oil. The non-return valve is developed to cope with ethanol, so internal components have been adapted for this. This is a full-flow construction that does not throttle the flow.
Full flow check valve. Can be used for fuel, oil, water and air systems.
Thread: AN10 on both sides
This check valve does not throttle the flow.
Opening pressure approx.: 0.04 bar
Measure
Key socket: 31.5mm
Largest diameter: 36mm
Total length: 74mm
Areas of use
Staged activation of fuel pumps
When using two or more fuel pumps that do not run all the time but are activated gradually, a non-return valve is mounted on these to prevent fuel from being pushed out the back way back to the fuel tank and making it harder for the primary pump to keep the pressure up.
Keep fuel in spreader bridge
When the engine is switched off, fuel slowly flows back to the fuel tank and the fuel bridge is emptied of fuel. This introduces air into the fuel system and makes the engine difficult to start. With a mounted non-return valve, there is always fuel left and the engine starts easily.
----------------
Guides & Info
Be first to write a review about this product!
Your review:
To send a review, you must be logged in.
Associated products
Tools
